If you’re looking for a roof that is both attractive and durable, you might be wondering how to install rolled roofing. The process is actually pretty easy. There are some important steps to follow. First, make sure the plywood on which the rolled roofing will be installed is clean and dry. Then, apply roofing cement to the end laps and seams of the sheet. This type of roofing is suitable for all roofs with a slope of at least 1 in 12.
To install rolled roofing, start by cutting the first sheet of material to about 35 inches wide. Next, lay the sheet along the length of the roof and nail it down. Be sure to apply a lot of pressure when cutting the first sheet. Next, lay the sheet little by little, covering the first chalk line and pushing it into the wet cement. Repeat the process with each subsequent layer. You’re almost finished! Once the rolled roofing is secured on the entire roof, you can apply the final coat of roofing cement.
Before you begin attaching the second layer of rolled roofing, measure the roof from bottom to top. If the roof is uneven, you will have to measure the roof again and mark the edges with a chalk line. Then, use a meter stick to ensure that the line is straight. Once you have laid down the first layer, you can then attach the second one, and so on. Remember, you should keep at least ten inches of space between each layer.
To ensure that your new roll roof is protected against leaks, you should also apply an underlayment. It is important to choose the right type of underlayment to protect your new roof from the elements. Choose a waterproofing membrane if you live in a humid climate. The underlayment is necessary for rolled roofing, and you should purchase the right type of material depending on your climate. There are some specific guidelines you should follow when installing roll roofing.
Roll roofing is a cost-effective and practical alternative to composition shingles. It is made of materials that are similar to composition shingles, but not as durable. It is also lightweight, so you can easily carry it up the roof yourself. In contrast, shingles require a crane for installation. However, if you are replacing the roof and have existing shingles, you can easily install rolled roofing over them. This method will ensure that your existing roof is more protected than before.
Roll roofing is an excellent choice for low-sloped roofs in northern regions. The material is lightweight and inexpensive. Roll roofing rolls are 36 inches wide, and each roll weighs around 75 pounds. You can find the materials you need at a local home improvement store. If you do not feel comfortable installing roll roofing on your own, seek professional help. In addition, a DIY approach will save you a lot of money in the long run.