How to Apply Rolled Roofing

how to apply rolled roofing

If you are new to the world of rolled roofing, you may be wondering how to apply it properly. Fortunately, there are some basic steps that you can follow to apply the right type of rolled roofing. Before you get started, make sure that you’ve laid down the proper foundation. For example, you should make sure that you have installed the drip-edge flashing. Then, prepare the roofing cement and place the nails close to the required edges.

To lay the first layer of rolled roofing, measure 35 inches from the bottom edge of the roof. Use a meter stick to ensure that the line is straight. After nailing down the first row of roll roofing, cut off any excess material with a razor knife. Remember to lay down the first layer at least 32 inches above the line that you just made with the chalk. The second layer should overlap the first one and should extend from the end of the roof to the other.

Next, cut the rolled roofing to fit your roof’s length. You should use pressure when cutting it. When you lay down the first layer of roll roofing, make sure to leave some overlap so that the cement can set properly. Then, start with the middle section of the roof and work your way up. Don’t forget to draw a chalk line where you will overlap the first sheet. Continue to work your way up until you’ve applied the last layer.

If you want to install rolled roofing on your own, you may need to hire a professional. The pros at PJ Fitzpatrick have helped thousands of property owners install rolled roofing on their own. Call a roofing company today to have a professional evaluate your roof and give you the best recommendation for your home’s specific needs. There are several advantages of using roll roofing over traditional flat roofing. Once you’ve chosen a rolled roofing type, you can then move on to applying it on your roof.

First, determine the width of your rolled roofing. Roll roofing comes in different widths, ranging from 36 inches to 39 inches. Be sure to measure carefully and use a chalk line to mark your measurements. Depending on the width, you can adjust the chalk line to get it perfectly straight. It may take as long as a day for the rolled roofing to flatten. In warm weather, however, you can adjust the width of the roll roofing to the appropriate length.

Once you have determined the width of your roll roofing, you can prepare to apply it. Before you begin, gather all the materials that you need. The materials you need include nails, roofing felt, and fasteners. These materials can be purchased at most home improvement stores. You should also prepare a scaffolding to use on top of the rolled roofing. Lastly, remember that rolled roofing is lightweight and can be easily transported. It can be the perfect choice for low-inclined roofs.