To start cutting corrugated plastic roofing, you need to lay the sheet on a level surface. Use a straightedge or felt marker to mark the lines. Once you’ve marked the line, you can move the straightedge to mark the other edge of the sheet. When cutting, move slowly toward the edge, aligning the straightedge with the sheet’s edge. Hold the sheet loosely while cutting it to prevent it from slipping off the table. Wear safety goggles to protect your eyes.
You’ll need a circular saw or multipurpose cutting tool to cut corrugated plastic roofing. While this doesn’t seem like a difficult task, any mistakes could lead to wasted material. When finished, however, the roofing will retain its durability and look. By following these tips, you’ll be able to cut corrugated plastic roofing easily. But before you get started, make sure you have the right equipment.
Place the corrugated plastic roofing sheet on a level surface. You can also place a piece of cardboard under it and use this to cut the corrugated plastic roofing sheet. Start by measuring the length of the corrugated plastic roofing sheet. Mark the edges with a scale and make sure you follow a straight line. Repeat this process until the cut line has been reached. You should then place the corrugated plastic roofing sheet on the sawhorses and attach the saw blade.
Before cutting the corrugated plastic roofing, you need to put on appropriate PPE. Use protective goggles and a dust mask. Always follow manufacturer instructions when cutting corrugated plastic roofing. Once you’ve cut the sheet, make sure you clean the work space thoroughly. Move the cut sheet to a secure area and use the tools carefully. If you don’t have the right tools, you can also use a band saw or a fine blade on a saw.
Corrugated plastic roofing sheets come in solid and transparent varieties. They’re a versatile and affordable way to cover a greenhouse or a porch. Before cutting the corrugated plastic roofing sheets, remember to wear safety gloves and follow proper safety measures. You might even be able to cut them without hurting yourself. Just be sure to follow the instructions on the packaging to protect your hands. If you’re unsure of how to cut corrugated plastic roofing sheets, try this method:
Using a circular saw is the most effective method. Make sure you have a blade that has a carbide-tipped surface. Hold the blade guard open with one hand while stabilizing the other one. Once the blade guard reaches the top of the corrugated plastic roofing, release the safety guard. To cut corrugated plastic roofing safely, press the corrugated plastic roofing against a flat surface and minimize vibrations.
When cutting corrugated plastic roofing, make sure the holes in the panels are drilled 1/16″ larger than the diameter of the fasteners you’re using. Then, you need to make sure the panel is predrilled at the ends and cut accordingly. For fiberglass panels, make sure the holes in the panels are one-half inch larger than the diameter of the fasteners you’re using. And remember to drill at least one panel at a time to avoid cutting two panels at once.